User Guide
EdgeLens | INT10G8XX56-SP | 4.29.2
Filters may be added in any combination. If multiple filters are added, then the top filter is the
highest priority. The filters are considered from top to bottom. A filter may be selected
and moved up or down depending on priority preference.
Figure 36 Port XX Egress Filters
Figure 37 Egress Filter System Considerations
3. If new is selected, the Edit Filter panel will be displayed.
4. Enter the filter name, optional. If no name is entered the system will automatically apply a name to the
egress filter as follows, eFltPXX, eFltPXX(2), eFltPXX(3) etc.
5. Select Accept.
6. Select Cancel to disregard.
7. Remove a filter template by selecting the red X.
Config Map Save
1. Select Save to save the current configuration.
The “Save this configuration? (May take a few seconds.)” panel will be displayed.
2. Select OK to save the Config Map.
3. Select Cancel to disregard.
Garland Technology | 716.242.8500 | garlandtechnology.com/support
Copyright © 2023 Garland Technology, LLC. All rights reserved.
35
