User Guide
EdgeLens | INT10G8XX56-SP | 4.29.2
3. One load balancing group plus separate port(s) may be applied. The traffic applied to the ports
assigned to the load balancing group will follow the hashing per the load balancing policy. 100% of
the traffic will be sent to each of the separate port(s).
Figure 34 Egress Load Balancing Group and Port(s)
4. Remove a port or load balancing group by selecting the red X.
Egress Filter
1. Select the gray filter icon on the desired egress port.
Figure 35 Egress Filter
The Port XX Egress Filters panel will be displayed.
2. Add filters by placing the cursor on the desired filter template. A previously created filter
template or the new filter template option may be selected. Press the left mouse button. Drag the
filter template to the Port XX Egress Filters panel and release. The filter template will become an
actual egress filter once the config map is saved.
Garland Technology | 716.242.8500 | garlandtechnology.com/support
Copyright © 2023 Garland Technology, LLC. All rights reserved.
34
