User Guide
EdgeLens | INT10G8XX56-SP | 4.29.2
Figure 29 Ingress
2. Remove a port by selecting red X.
Filter
1. Add filters by placing the cursor on the desired filter template. A previously created filter
template or the new filter template option may be selected. Press the left mouse button. Drag the
filter template to the Filter panel and release. The filter template will become an actual filter once
the config map is saved.
Filters may be added in any combination. If multiple filters are added, then the top filter is the
highest priority. The filters are considered from top to bottom. A filter may be selected
and moved up or down depending on priority preference.
Figure 30 Filter
Figure 31 Filter System Considerations
2. Filter templates may be modified by selecting the green filter icon for the desired template.
The Edit Filter panel will be displayed. Any option modification made will not change the
original template. It is advisable to rename a filter if the original filter template options were
modified.
Garland Technology | 716.242.8500 | garlandtechnology.com/support
Copyright © 2023 Garland Technology, LLC. All rights reserved.
32
