User Guide
EdgeLens | INT10G8XX56-SP | 4.29.2
3. Select the name pencil to apply a name, optional. If no name is entered the system will
automatically apply a name to the config maps as follows, map, map(1), map(2) etc.
4. Enter the desired name.
5. Select the Check to apply.
6. Select the No to disregard.
7. Select the Description pencil to apply a description, optional.
8. Enter the desired description.
9. Select the Check to apply.
10. Select the No to disregard.
Ingress
1. Add an ingress port by placing the cursor on the desired port. Press the left mouse button. Drag
the port to the Ingress panel and release. Ports may be added in any combination. If multiple ports are
added, then the traffic from all ingress ports will be aggregated.
Garland Technology | 716.242.8500 | garlandtechnology.com/support
Copyright © 2023 Garland Technology, LLC. All rights reserved.
31