User Guide
EdgeLens | INT10G8XX56-SP | 4.29.2
7. Select Save.
8. Select Cancel to return to the Load Balancing Groups panel.
The load balancing group will be displayed on the Load Balancing Groups panel. The assigned
ports will also be displayed.
9. Edit the load balancing group by selecting the Edit for the desired group.
10. Deleted the load balancing group by selecting the red X. Load balancing groups may not be
deleted if used on a config map.
Load Balancing Policy
The load balancing policy determines the hashing applied to all load balancing groups, taps in the load
balance mode and the ATLB2 chained mode. The load balancing policy options are as follows:
IPv4 Source
L4 Source Port
IPv4 Destination
L4 Destination Port
IPv6 Source
MAC Source
IPv6 Destination
MAC Destination
1. Select Load Balancing Policy.
The Load Balancing Policy panel will be displayed.
2. Select or deselect the desired load balancing policy options.
3. Select Save to save updates.
4. Select Cancel to disregard changes.
Config Map
Config maps are unidirectional connections between ingress port(s) to egress port(s) and/or a load
balancing group.
1. Select Configuration Maps.
The Packet Broker Configurations panel will be displayed.
2. Select Create Config Map.
The Create Config Map panel will be displayed. Any previously created load balancing groups
or filter templates will be displayed along with the new options. Any port shaded gray can be
used for a config map, any port shaded black may not be used.
Garland Technology | 716.242.8500 | garlandtechnology.com/support
Copyright © 2023 Garland Technology, LLC. All rights reserved.
30
