User Guide
EdgeLens | INT10G8XX56-SP | 4.29.2
3. Select OK.
Add SSL Certificate
Uploading a custom SSL certificate involves two files. The cert.pem file and key.pem file. The unit will
validate these files during the upload. If the files do not match or one of the files are corrupted the unit will
abort the upload.
1. Select Add SSL Certificate.
The Select Certificate and Select Key File panel will appear.
2. Select Choose File for Select Certificate.
3. Select the desired cert.pem file.
4. Select Open.
5. Select the Choose File for Select Key File.
6. Select the desired key.pem file.
7. Select Open.
8. Select Upload.
The GUI message will be displayed, “Please wait. Browser will refresh after 90 seconds”.
9. Verify SSL Certificate Loaded “true”.
10. Verify Using Uploaded SSL Certificate “true”.
Disable Using Uploaded SSL Certificate
1. Select Edit Settings.
2. Deselect Using Uploaded SSL Certificate.
3. Select Save.
The GUI message will be displayed,”Saved Settings. Changes will cause network
connectivity disruption for about 60 seconds”.
4. Refresh Browser.
5. Verify SSL Certificate Loaded “true”.
6. Verify Using Uploaded SSL Certificate “false”.
Date & Time
The following configuration options may be displayed, modified, enabled, or disabled.
Timezone
UTC
NTP No Authentication (Symmetric)
NTP Authentication (Symmetric)
Garland Technology | 716.242.8500 | garlandtechnology.com/support
Copyright © 2023 Garland Technology, LLC. All rights reserved.
13
