User Guide
PacketMAX |
GAA10G20AC | 4.23.1
3. Select the Name pencil icon to apply a name, optional. If no name is entered the system will
automatically apply a name to the config maps as follows, map, map(1), map(2) etc.
4. Place the cursor in the Name panel and enter the name.
5. Select the Check to apply.
6. Select the Description pencil to apply a description, optional.
7. Place the cursor in the Description panel and enter the description, optional.
8. Select the Check to apply updates.
Ingress
1. Add an ingress port by placing the cursor on the desired port. Select with the left mouse button. Drag
the port to the Ingress panel and release. Ports may be added in any combination. If multiple ports are
added, then the traffic from all ingress ports will be aggregated.
Figure 1 Ingress
2. Remove a port by selecting the Red X.
Garland Technology | 716.242.8500 | www.garlandtechnology.com
Copyright © 2023 Garland Technology, LLC. All rights reserved.