USER GUIDE
EdgeSafe 40G Bypass Modular Network TAP | M40GBP
Version 1.6 Page 31 of 159
Garland Technology reserves the right to make changes without further notice to any products or data herein to improve reliability, function or design.
Confidential -This document is
Garland Technology
.'s property. This document may not be copied, duplicated and transferred to electronic or mechanized
media or used for any other purpose, including any part thereof or attachment thereto, except as authorized in advance and in writing by
Garland Technology.
6.2 Commands list
M40GBP command line interface:
get/set_hb_act_mode, get/set_bypass_mode, get/set_2pl,
get/set_hb_interval, get/set_hb_holdtime, get/set_keep_hb_act_mode,
get/set_hb_exp_state, get/set_en_act_hb_restore,
get/set_ip, get/set_netmask, get/set_gateway,
get/set_time, set_user, set_psw,
get/set_unit_name, whoami, get/set_flow_control,
get_ver, get_params, get_dev_state,
get_hw_ver, get_fw_ver, get_dev_tk_num,
get_appl_state, get_term_state,
get_link, get_log, get_current_user,
get/set_snmp_ver, get/set_snmp_srv_ip, get/set_snmp_user,
set_snmp_user_psw, apply_snmp, get/set_trap,
reset_log, set_default, update,
reboot, reset_err, get/set_web_https_state,
get_hb_pkt, load_hb_pkt, set_default_hb_pkt,
get/set_session_exp_time, get/set_mgmt_port_state,
get/set_hb_tx_dir, get/set_hb_fail,
get/set_remote_log_server_ip, get/set_remote_log_state,
get/set_ntp_state, get/set_ntp_server_ip, send_ntp_request,
get_timezone_list, get/set_timezone, get_daylight_state,
get_support_info, get/set_web_user, set_web_user_psw,
save_conf, restore_conf, get_list_conf,
remove_conf, get/set_tacacs_multi_users,
get/set_tacacs_state, set_tacacs_key, get/set_tacacs_server_ip,
get/set_telnet_state, get/clear_stat, get/set_rs232_speed,
set/del_mgmt_permit_ip, get/check_mgmt_permit_ip,
get/set_m2n, get/set_m2m,
get_power_state, power_off,
get/set_hb_dst_mac, get/set_hb_src_mac, set_default_hb_macs,
get/set_web, get/set_seg, get_dev_prop,
get_health, set/restore_cert,
get/set_radius_auth_port, get/set_radius_acct_port,
get_first_error, get_last_error, stop_all_sessions,
get/set_rx_tx_err_mode,
get/set_ssh_state, get/set_snmp_msg_port, get/set_snmp_trap_port,
add/del_ntp_server_ip, get/set_int_vlan, add/del_tacacs_server_ip,
get/set_tacacs_login_fallback, get/set_rs232_tacacs_login,
get/sel_snmp_entry, add/del_snmp_entry, add/del_snmp_srv_ip,
get/set_snmp_access, get/set_snmp_status,
add/del_lag_members, set_lag_min_work_members,
set_slct_bypass_mode, get/set_slct_bypass, add/del_slct_bypass
save_slct_bypass_conf, restore_slct_bypass_conf
remove_slct_bypass_conf, get_list_slct_bypass_conf
help - this screen,
help full - full help,
exit - exit from CLI (logoff).
Ctrl.m1s1.40g: M40GBP$
