manualshive.com logo in svg

Garland EdgeLens INT10G8SR56, Руководство пользователя, Страница: 66 / 76

Поделиться
Скачать
Garland EdgeLens INT10G8SR56 Скачать руководство пользователя страница 66

User Guide

EdgeLens | INT10G8XX56 | 4.22.1

 

Ingress

1. Add an ingress port by placing the cursor on the desired port. Select with the left mouse button. Drag

the port to the Ingress panel and release. Ports may be added in any combination. If multiple ports are
added, then the traffic from all ingress ports will be aggregated.

Figure 29 Ingress

2. Remove a port by selecting the Red X.

 

Filter

1. Add filters by placing the cursor on the desired filter template. A previously created filter

template or the new filter template option may be selected. Select with the left mouse button. Drag the
filter template to the Filter panel and release. The filter template will become an actual filter once
the config map is saved.

Filters may be added in any combination. If multiple filters are added, then the top filter is the

highest priority. The filters are considered from top to bottom. A filter may be selected
and moved up or down depending on priority preference.

Figure 30 Filter

Figure 31 Filter System Considerations

2. Filter templates may be modified by selecting the green filter icon for the desired template.

Garland Technology  |  716.242.8500  |  www.garlandtechnology.com
Copyright © 2022 Garland Technology, LLC. All rights reserved.

66

Содержание EdgeLens INT10G8SR56













































































Отзывы:

Нет отзывов