Important Information
4
109030
1
Important Information
1.1
General Information
The Combination Pump Systems conform to the following directives:
2006 / 42 / EC
Machinery Directive
20
14
/
30
/ E
U
Electromagnetic Compatibility Directive
The CE sign is located on the rating plate. Observe the binding national and local regulations
when fitting the pump into installations.
Our products are sold worldwide and can therefore be equipped with the typical national
plugs and for the various voltages. You will find more information about the available pump
designs on our web page in the internet.
1.2
Target Groups
This Operating Manual is intended for the personnel planning, operating and maintaining
Combination Pump Systems.
This group of people includes:
Designers and fitters of vacuum apparatus,
Employees working on commercial laboratory and industrial vacuum technology applica-
tions and
Service personnel for combination pump systems.
The personnel operating and maintaining the rotary vane pumps must have the technical
competence required to perform the work that has to be done.
The user must authorize the operating personnel to do the work that has to be done.
The personnel must have read and understood the complete Operating Manual before using
the rotary vane pumps.
The Operating Manual must be kept at the place of use and be available to the personnel
when required.
1.3
Intended Use
The layout of the chemvac Combination Pump System must be appropriate for the condi-
tions of use. The user bears the sole responsibility for this.
The chemvac Combination Pump System may only be operated under the conditions stated
in the "Technical Data" section,
on the type plate, and
in the technical specification for the order concerned.
1.4
Use for an Unauthorized Purpose
It is forbidden to use the pump for applications deviating from the technical data stated on
the type plate or the conditions stated in the supply contract, or to operate it with missing or
defective protective devices.
