Gardner Denver Reavell 5236, Руководство по эксплуатации и техническому обслуживанию

Страница: 12 / 134

P a g e | 2
3 WARRANTY
The compressor(s) and ancillary equipment supplied by Gardner Denver are covered under Warranty
for the period agreed in the Supply Contract.
The equipment provided is well designed to afford many years of trouble free service. However, should
the need arise to implement a warranty claim then this can be done using warranty Claim Form
obtainable from Gardner Denver Service Department. It should be noted that consumable parts that
require replacement during normal compressor operations are not normally covered under Warranty.
Similarly, the Warranty does not cover running adjustments.
Gardner Denver are well known in the market place for the design, manufacture and supply of high-
quality air compressor equipment. These compressors are constructed from the highest quality
materials and are designed and built according to the latest manufacturing techniques. The
compressor design will give good service providing that it is operated and maintained in accordance
with the information contained within this Manual.
4 MAINTENANCE WARNING
The use of replacement parts or lubricating oils not supplied or approved by Gardner Denver may lead
to failures in service which would not be covered by warranty.
Before any servicing or maintenance work is undertaken, the user is advised to contact the local
Gardner Denver Company or authorised Distributor for revised or up-dated information.
To ensure continued trouble free operation of the compressor it is important that periodic maintenance
and servicing are carried out in accordance with the information given in the "Maintenance" section of
this Manual. If any replacement or repair is needed use genuine Gardner Denver parts.
Any unauthorised modifications or failure to maintain this equipment in accordance with maintenance
instructions may make it unsafe. The use of replacement parts not supplied by Gardner Denver may
create hazardous conditions over which Gardner Denver has no control.
Such hazardous conditions may lead to accidents that can be life threatening, cause substantial bodily
injury or result in damage to the equipment. Gardner Denver can bear no responsibility for equipment
which has unapproved replacement parts fitteded.
5 STANDARDS, TESTING AND DOCUMENTATION
Gardner Denver / Reavell compressors / booster and modules incorporate manufacturer’s
standard equipment and selected components in order to manufacture specific packages for
the compression of Air and Gases. Reavell design, manufacture, testing is based in general
on the following standards:-.
2006/42/EC Machinery Directive
BS EN292 Safety of Machinery
BS EN1012-1 Compressors
– safety requirements
2014/68/EU Pressure Equipment Directive
2014/34/EU Equipment and Protective Systems Intended for Use in Potentially Explosive
Atmosphere (ATEX) Directive
Gardner Denver quality systems ar
e accredited with ISO 9001 approval by Lloyd’s Quality Assurance.