23
www.gd-elmorietschle.com
© Gardner Denver Schopfheim GmbH, Gardner Denver Deutschland GmbH
|
Maintenance and repair
7.2.3 Coupling
The coupling needs no maintenance.
a) For on site repair work the motor must be
disconnected from the mains by a qualified
electrician so that it cannot be started up again
accidentally. For repairs use the manufacturer,
its branch offices or authorised dealers. Please
contact the manufacturer for the address of the
service centre responsible for you (see Manufac-
turer‘s address).
NOTICE
For each machine that is sent to an Elmo Rietschle
Service centre for inspection, maintenance or repair,
a fully completed, signed declaration of harmles-
sness must be enclosed.
The declaration of harmlessness is part of the
supplier‘s documentation.
b) After a repair or re-commissioning, the actions
listed under „Installation“ and „Commissioning“
must be carried out as for initial commissioning.
Fig. 8 Clearance certificate 7.7025.003.17
For maintainance of the integrated frequency
converter (Fig. 2/V) see enclosed operating in-
structions 610.00260.40.000.
The operating instructions are available under
the following link:
• Download the PDF File:
http://www.gd-elmorietschle.com
¦
Downloads
¦
Product Documents
¦
Frequency Converters
7.2.4 Integrated frequency converter
7.3 Repair / Service
Prematic AG, Märwilerstrasse 43, 9556 Affeltrangen www.prematic.ch
Tel. 071 918 60 60, Mail: [email protected]
