Gardner Denver 3487T-01, Руководство по эксплуатации

Страница: 22 / 48

Installation and Operation
18 P1700040
5.5.2 Installation of the Grounding Plug
For
UL ONLY RELEVANT FOR UL ((240-265)/(415-460)V /
(200/346)V 60HZ OPERATION
This product must be grounded. In the event of an electrical short circuit, grounding reduces
the risk of electric shock by providing an escape wire for the electric current. User should
equipped this product with a cord having a grounding wire with an appropriate grounding plug.
The plug must be properly installed and grounded in accordance with all local codes and
ordinances.
Check with a qualified electrician or serviceman when the grounding instructions are not
completely understood, or when in doubt as to whether the product is properly grounded.
Do not use an adapter with this product. When the product must be reconnected for use on a
different type of electric circuit, the reconnection shall be made by qualified service personnel.
Make sure your extension cord is not damaged. When using an extension cord, be sure to
use one heavy enough to carry the current your product draws. An undersized cord results in
a drop in line voltage and loss of power and overheating.
WARNING!
Improper installation of the grounding plug is able to result in a risk of electric shock.
When repair or replacement of the cord or plug is required, do not connect the
grounding wire to either flat blade terminal. The wire with insulation having an outer
surface that is green with or without yellow stripes is the grounding wire.