Traditional Garden Obelisk
Assembly Instructions
07700
Components Supplied
Tools Required (not supplied)
Phillips cross-head screwdriver
Mallet
Tape Measure
Before You Start
• Layout all of the component parts and
make sure you have all of the parts listed.
• When you are ready to start, make sure
that you have the right tools to hand,
plenty of space and a clean dry area for
assembly. Always try to assemble the
product as close as possible to the
intended location.
• Remove all plastic bags and dispose of
safely.
• Retain the instructions for future use.
Caution
This pack contains small items which should
be kept away from children.
Ref Description
Illustration
Qty
A
Upper leg
3
tubes
B
Lower leg
3
tubes
C
Rings 3
D
Moisture
3
protection
sleeves
E
Ground hole
1
maker
F
Finial retaining
1
screw
G
Finial
1
Consumer Helpline
If you have any problems or queries with
this product then please contact our
helpline number: 01406 372227,
or write to: Gardman Ltd. High Street,
Moulton, Spalding, Lincs, PE12 6QD.
Fax: +44 (0) 1406 372233.
