Solar Fountain Feature
Model: FOUNT-BALL-BK
Note:
1. Charge the pump unit for at least two days before the pump is used for the first time;
2. The LED light will work only when it's dark. If you want to test it in the daytime, turn the
solar panel upside down and minimise exposure to sunlight.
1
OVERVIEW
1.1
The solar pump is designed for fountain, pond or outdoor use. In order to make the solar pump
work, the solar panel needs to be in direct sunlight. When the sun light is strong enough, the
solar pump will start to work automatically. It will stop working when the solar panel is in
shadow or the sunlight is not enough. If the fountain is used in evening, four built-in white
LEDs will give light automatically to enhance the beauty scene of the water jet.
1.2
This solar pump is equipped with a battery pack. Extra electricity will be stored in the battery
pack and to be used when there is no enough sunlight or in night times. Press the button
(Switch), which is on the control house which is affixed to the rear side of the solar panel, to use
the stored electricity to power the pump.
2
ASSEMBLING AND USING YOUR PRODUCT
2.1
Unpack all components carefully. Please keep in mind that some water may splash over the rim
of a bowl, do not set up the cascade fountain on a surface which may be damaged by water.
2.2
Fill the fountain with clean tap water from the bowl.
2.3
Connect the rubber tube, which is from the upper bowl of the fountain, to the pump then place
the pump in water and make sure it is
fully immersed
in water.
2.4
Connect the pump cable to the socket of the control housing, which is on the rear side of the
solar panel;
2.5
Connect the LED light (optional) cable to the socket of the control housing;
2.6
Make sure direct sunlight shines on the solar module.
2.7
The solar fountain is now ready for use.