Ball Solar Fountain
with Battery Back-Up Solar Pump
SWGSL220
These instructions contain important information for using the product for the first time.
Please keep this instruction for later reference. They should always accompany the product
in the event of transfer a new user.
OVERVIEW
The solar pump is designed for fountain, pond or outdoor use. In order for the solar
pump to operate, the solar panel needs to be in direct sunlight.
This solar pump is equipped with battery pack and can be switched on and off by a
touch switch on the control housing. In the evening, the built-in white LEDs will light
automatically.
CAUTION: Do not strike the solar panel. Do not let the pump run dry for long time. Do not
lift the pump by the power cord. Operate in freshwater only.
Streetwize Accessories:
Unit 1, Royce Trading Estate, Ashburton Road West,
Trafford Park, Manchester M17 1RY
Sales enquiries:
Technical enquiries:
0161 447 8597
www.streetwizeaccessories.com
FUNCTIONALITY PROBLEMS
Pump does not operate even thought the solar module is in full sunlight.
- No connection to the solar module - check connection to the solar module.
- Impeller is blocked - To clean the pump, remove the front plate and the impeller.
Use a small brush or steam of water to remove any debris.
Pump does operate but there is no water running through the fountain head check for
the build up of sediment or scale in the tubes or the filter- clean the tubes and the filter.
STORAGE
Please charge the battery for at least a day in direct sunlight when the first time using
the solar pump or when you store the solar pump for a winter.
In order to keep the battery long life, please charge the solar pump to fully charge
status and plug-out the pump from the solar panel before you store the solar pump into
warehouse.
TECHNICAL DATA
Solar Panel
2W
Operation Voltage
6V DC
Water Flow Max.
200LPH
Cable Length
5M
Lithium Battery
3.7V 2000mAh
M17 1RY
