0283S Rev 11/13
39-360
With the help of one other person, you can assemble the
Tabletop SunLite
®
Garden in less than an hour. The only tools
you’ll need are a Phillips screwdriver, a hammer or rubber
mallet and pliers.
Frame Assembly
Step 1.
Lay out all Frame Parts on a flat, clean surface.
Step 2.
Connect an A4 Side Base Frame to the end of each
A2 Bar using two Phillips-head bolts (Figure 2). Repeat
this step to connect the second A4 Side Base Frame to the
other end of the A2 Bars. Do not fully tighten the bolts on
the frame until Step 4.
Step 3.
Connect the A1 Side Frames to the A4 Side Base
Frames by placing a Phillips-head bolt up through the hole
in the underside of each A4 Frame. Make sure the pre-
drilled guide hole in the A1 Side Frame is positioned near
the top. (Figure 2).
Step 4.
Insert a Phillips-head bolt through the top bolt hole
of the A1 Side Frame into the end of the A3 Bar (Figure 3,
on next page). Do this on both ends of the Bar. Now fully
tighten all the bolts on the frame.
over please
Standard Tabletop SunLite
®
Garden
Figure 2
Parts Included
Qty.
Frame:
A1 Side Frames
2
A2 Bars
2
A3 Bars
1
A4 Side Base Frames 2
Poly Tray
1
Lights :
Light Fixture Hood
1
Ballasts
2
T-5 Light Tubes
2
6' Light Cord
1
Link Cord
1
Hardware: Ball Chains
2
Chain Connectors
4
Large Split Rings
2
Small Split Rings
2
Chain Grips
2
Bolts
8
End Plugs
6
Bolt
Bolt
Bolt
A1
A4
A2
A2
Figure 1
