Solar Animal and Bird Repellent GS-502
USER INSTRUCTIONS
Thanks for purchasing our device. Please read and understand these instructions and keep this manual for future
reference. This item uses solar power to recharge the batteries, so it always works after the battery is recharged. The
Passive Infrared sensor (PIR) detects motion and triggers the ultrasonic speaker, emitting a tone that animals can feel,
which chases them away. Our device is very effective, creating an unpleasant environment for the animals using
ultrasonic sound. Sooner or later, they will leave your property.
Operation
- A strong ultrasonic wave to frighten animals.
The wave is activated when an animal enters
the PIR Sensor range, then the animals feel
uncomfortable and will run away from the
area.
- A strong flashing LED to scare animals. The
strong flashing LED will be activated when an
animal enters the area, then the animal will
be scared and flee away.
- In order to have better effect, we add an
alarm sound to scare wild animals.
Set Up
-
“Sensitivity” Button (Left): You can adjust the item’s sensitivity and distance. By turning the knob clockwise, you
increase the range of protection.
-
“Frequency” Button (Right): This is to control frequency. By turning the knob clockwise, the frequency will be
increased.
-
“Frequency” Button position options:
MODE
DESCRIPTION
ANIMAL
0
Off
---
1
Audible beep (13.5-19.5 kHz)
Cats, dogs, birds, etc. + all
animal types of Mode 2 and 3
2
High frequency beep (19.5-24.5 kHz).
When placed in the garden, the sound is barely
audible.
-
Raccoons, badgers, skunks,
martens, foxes, etc. + all animal
types of Mode 3
3
100% Ultrasonic quiet (24.5-45.5 kHz)
Bats, mice, rats, rodents, etc.
4
Alarm + strong LED flashing lights
Wild animals
5 -
Combined audible beep (13.5-45.5 kHz)
-
+ strong LED flashing lights
The most effective: all animals
