1
Two Tier Boot Stands Instruction Manual
G3371 4 pair / G3372 6 pair
Parts description
1.
Poles
2.
Metal balls
3.
Base
4.
Bolts (not shown)
5.
Hex key (not shown)
Assembly
The instruction is the same for both 4 and 6 pair stands
1.
Unpack all parts and dispose of packaging correctly. Lay all the parts
on a flat surface.
2.
On each pole attach a metal ball turning clockwise by hand to tighten
3.
Attach the other end of the pole to the base using the bolts supplied
and tighten with the hex key supplied. Do not overtighten
Care and maintenance
Regularly wipe all parts with a clean cloth removing any debris check all
parts are tightly secured and if not retighten securely.
Periodically apply a small amount of light oil to all parts and connections to
lubricate and protect from corrosion due to any rain water running from
wellies and boots.
1
2
3
