What’s in the Box?
Set Up
4 x Cross Feet Pieces
2 x Bottom Upright Pole Sections
2 x Top Upright Pole Sections
2 x Cross Beam Sections
2 x Large Pole Connectors
1 x Small Pole Connector
1
Instructions
Limbo
Slot together the two pairs of cross feet
pieces to form each of the cross bases
for the upright poles.
Connect one bottom upright pole
section and one top upright pole
section together using a large plastic
connector. Twist the connector so that it
is in line with the slots in the poles and
push it in to secure it in place.
Repeat for the second upright pole.
Screw the bottom section of each
upright pole into one of the cross feet.
Connect the two cross beam sections
together using the small plastic
connector. Again twist the connector
so that it is in line with the slots in the
poles and push them in to secure the
connector in place.
Balance both ends of the crossbeam
on the highest peg of the upright poles
and you are ready to start the game.
