GARDASOFT RT Series, Руководство пользователя, Страница: 37 / 66

RTxxx LED lighting controllers - User Manual
9.5 Setting up selected output
Set up selected output if you want to switch between to lighting levels on a
trigger input. Press and hold
SEL for one second ,
CH1
is displayed. Use
the p and q buttons to select the channel you want to set up, and follow
the keystrokes below:
The channel you want to set up is displayed.
Press the
SEL button.
Use the
p
and
q
buttons to select SSE and
press the SEL button.
b1 is displayed. Press the SEL button to set the
first intensity level.
Use the p and q buttons to set the first intens-
ity level from 1% to 99.9%. The default setting is
50%.
Press the SEL button.
b2 is displayed. Press the SEL button to set the
second intensity level.
— 36 —
RTxxx LED lighting controllers - User Manual
Use the
p
and
q
buttons to set the second
intensity level from 1% to 99.9%. The default
setting is 50%.
Press the
SEL
button.
trg is displayed. Press the SEL button.
Use the p and q buttons to select the trigger
( IP1 or IP2 ) you want to set up, and press the
SEL button.
To set the trigger polarity so that it is active high,
press the
SEL button with F P displayed. Or...
If you wish to set the trigger polarity so that it is
active low, use the
p
and
q
buttons to select
F-P and press the SEL button.
— 37 —
WWW.STEMMER-IMAGING.COM