PP520 LED lighting controllers - User Manual
Your PP520 is ready to use.
9.6
Setting pulse delay and width times
When the PP520 displays numeric values you can change, the right hand
digit flashes. You can then use the
p
and
q
buttons to set the required
value.
To set the pulse delay and pulse width values, a scheme is used where the
exponent (power of ten) of the value is set. The exponenet values are as
follows:
Exponent
value
Multiplier
Number
format
Range of values
E-3
0.001
999.
Values displayed in milliseconds from 1ms to
999ms in steps of 1ms
E-4
0.0001
99.9
Values displayed in milliseconds from 0.1ms to
99.9ms in steps of 0.1ms
E-5
0.00001
9.99
Values displayed in milliseconds:
PP520: 0.02ms to 980ms in steps of 0.02ms
PP520F: 0.01ms to 9.99ms in steps of 0.01ms
E-6
0.000001
999.
Values displayed in microseconds:
PP520: 20μs to 980μs in steps of 20μs
PP520F: 1μs to 999μs in steps of 1μs
To enter pulse delay and width times, follow the key strokes below:
Use the
p
and
q
buttons to select
E-3
to enter
values from 1ms to 999ms in steps of 1ms.
Press the
SEL
button.
—
28
—
