PP520 LED lighting controllers - User Manual
The PP520 displays a pattern of alternating
horizontal bars when the light is operating
normally. If you power cycle the controller, it will
resume with the same settings.
Other displays are shown for channel 2
connected, and channels 1 and 2 connected.
If an error occurs (if the light is disconnected for
example), the PP520 displays
OP
. Press the
SEL
button to cancel this.
9.3
Setting up continuous output
Press the
SEL
button for 1 second and follow the steps below:
CH1
is displayed. Use the
p
and
q
buttons to
select
CH2
if you wish to set up channel 2.
Press the
SEL
button.
—
24
—
