Garage Smart myLIFTER, Инструкция по установке и эксплуатации

Страница: 25 / 31

3. Firmly press the Pair button next to the Status light on your lifter.
When the Status light blinks green, the lifters are paired with your app.
On the Available Lifters screen, your newly paired lifter is displayed with its
MAC (media access control) address as its default name.
Edit and Rename a Paired MyLifter
1. Tap in the upper left-hand corner to go to the Home screen.
2. On the Home screen, tap Edit in the upper right-hand corner of the screen.
The button name changes from Edit to Exit and the app enters Edit Mode. In
Edit Mode you can rename the lifters or delete them if you need to.
3. Tap the pencil icon to rename the lifters.