Ganz PIXELPRO SERIES, Инструкция по интерфейсу

Страница: 33 / 111

Configuration of Zones and Rules
25
Detection Rules
Once some detection zones and/or lines have been configured, it's possible to define some
detection rules that apply to the zones/lines. By default, zones and lines are automatically
configured to detect object presence.
The rules are defined in the Properties Inspector:
The properties inspector is context-sensitive to the zone selected. As different zones/lines
are selected, so the properties inspector changes to reflect the rules currently configured on
that zone. Defining a rule is a simple matter of checking the box next to the rule required. In
all cases, the rules are configured with sensible default values. Of course, these can be
customized to suit the detection scenario. The selection of multiple rules on a detection
zone is supported.
Object Presence
Enable the object presence rule on the selected zone by checking the Presence box in the
properties inspector and click apply.