Ganz Genstar ZNT8-BA1F-T Series, Руководство пользователя

Страница: 8 / 36

GANZ ZNT8-BA1Fxx-T Thermal Network Camera
User Manual
6 Issue V1.0 (2016-02-22)
Figure 1-1 Appearance and interfaces of the all-in-one thermal imaging IP camera
Table 1-1 Appearance and interface description
No. Physical
Interface Description
1
RESET
Press and hold this button for three seconds to restore
factory settings. Default value: 192.168.0.120
2 Network
indicator Network connection indicator
3 Video output
(VOUT)
Output analog video signal and connect to a TV monitor
to show analog video.
4
SD card
indicator
SD indicator states:

Off: No SD card is inserted.

On: An SD card is inserted.
5
SD card slot
Connect with an SD card.
Notes:

Before inserting the SD card into the slot, make sure the
card is not in write protection state.

Before removing the SD card from the slot, make sure the
card is not in read/write state; otherwise, data may be lost
and the SD card may be damaged.
Before hot swap, stop recording first.