Q.uick Start Guide
Q.brixx
32
Gantner Instruments Inc.
USA | China | Singapore | India | Austria | Germany | France | Sweden
1550 Hotel Circle N ∙ Suite 180 ∙ San Diego CA ∙ 92108 ∙ T +1 888 ∙ 512 ∙ 5788
[email protected]
www.gantner-instruments.com
6.
All measurement modules are shipped from the factory with a default address of
1. To modify the address of any module, click in the cell under the Address
column to change the address. Repeat the process for all modules.
7.
Click the write Changes button to apply the new settings.
Firmware Updates
1.
New Gantner hardware (controllers and measurement modules) are shipped
from the factory with the most up to date version of the firmware loaded.
However, it is good practice to verify if the system has the most current firmware
version from time to time. New firmware versions for controllers and
measurement modules are included when a new version of test.commander is
installed.
2.
To check the firmware of a controller, select Utilities > Controller Firmware
Update:
