Gantner Mifare Gat ECO.Lock 7 F/ISO Series, Установка, настройка и эксплуатация

Страница: 14 / 52

GAT ECO.Lock 7xxx F/ISO
Installation
14
HB_GAT-ECOLock-7xxxFISO--EN_12
www.gantner.com
3 INSTALLATION
NOTE!
These installation instructions describe how to install the GAT ECO.Lock 7xxx F/ISO electronic lock. Please
read this section carefully prior to working on the lockers or installing the locks.
3.1 Test Installation
As the GAT ECO.Lock 7xxx F/ISO is suitable for a wide range of installation applications, always perform a test
installation including functional testing of the GAT ECO.Lock 7xxx F/ISO in a sample locker from the facility before
starting with the mass production of lockers.
Ensure that the door shackle slides easily in and out of the opening in the locker body. Also test that the GAT
ECO.Lock 7xxx F/ISO locks and unlocks as required, ideally using a data carrier of the same type to be used with
the locker system to ensure that the data carrier functions as required.
3.2 Replacement after a Burglary Attempt
If a burglary (forced opening) is attempted or occurs at a locker, the entire GAT ECO.Lock 7xxx F/ISO must be
replaced with a new one.
3.3 Metallic and Non-Metallic Doors
The GAT ECO.Lock 7xxx F/ISO is suitable for locker doors made of metal and non-metallic materials, and is also
suitable for indoor and outdoor installations. GANTNER provides six different models to suit these varying
installation applications. See section
“2.4 System Components” for more information.
The installation procedure is different for lockers with metallic doors and lockers with non-metallic doors. See
section “3.7 Installation in Lockers with Non-Metallic Doors” or “3.8 Installation in Lockers with Metallic Doors” for
the relevant installation instructions.