GL7p - Battery-powered, door-mounted electronic locker lock GL7p
General Information
www.gantner.com
HB_GL7p--EN_12
15
2.4.1
RFID Technologies
The following data carriers can be used for RFID identification with the GL7p.
MIFARE
®
(manufacturer NXP/Infineon)
- MIFARE
®
Classic (1k and 4k)
- DESFire EV1
®
and EV2
®
- MIFARE Ultralight
®
HID iClass
- Reading of unique number only
ISO 15693
- The GL7p operates with all currently known ISO 15693 data carriers.
In addition to the different RFID technologies, data carriers are available in a variety of shapes and sizes. The GL7p
is designed to operate with all different types of data carrier media.
2.4.2
Lock Orientation
For the GL7p variants with a PIN-code keypad, the printing of the PIN-code keypad must be observed (recognizable
by the last digit of the model identifier). The different variants must be mounted as follows.
0 ... vertical top
1 ... horizontal, right-hinged door (i.e., the lock is on the left and the door opens on the left)
2 ... horizontal, left-hinged door (i.e., the lock is on the right and the door opens on the right)
Figure 2.1
– Orientation of the GL7p variants with PIN-code keypad