Gantner GAT Access 6100 Series, Установка, наладка и эксплуатация

Страница: 13 / 99

GAT Access 6100 Terminal Series
General Information
www.gantner.com
HB_GAT-ACCESS6100--EN_14
13
2 GENERAL INFORMATION
This manual describes the installation, configuration, and operation of the GAT Access 6100, GAT Access 6100 F
PoE, GAT Access 6100 F BIO, GAT Access 6100 F Enrollment Station, and GAT TimeAxx 6150 terminals. See the
following chapter for more information regarding these device types. GANTNER Electronic GmbH also offers other
types of access terminals, which are described in separate manuals.
The GAT Access 6100 F BIO is a combination of the GAT Access 6100 F with a GAT FR 055 fingerprint reader,
which is used at the GAT Access 6100 F Enrollment Station. In this manual the combination of these two parts
will be referenced as "GAT Access 6100 F BIO".
For the identification of visitors, contactless RFID (Radio Frequency Identification) data carriers are used. Data
carriers are available in a variety of different forms such as plastic wristbands and chip cards. Data transmission
between the data carrier and the GAT Access 6100 is encoded for optimal security.
For technological flexibility, the access terminal is available with different types of RFID readers (all 13.56 MHz). The
following codes are used to indicate the type of RFID technology each terminal supports:
- GAT Access 6100 B:
LEGIC prime
- GAT Access 6100 BA: LEGIC advant
- GAT Access 6100 F: MIFARE
®
- GAT Access 6100 ISO: ISO 15693
- GAT Access 6100 F PoE: MIFARE
®
- GAT Access 6100 F BIO: MIFARE
®
- GAT Access 6100 F Enrollment Station: MIFARE
®
- GAT TimeAxx 6150 B: LEGIC prime
- GAT TimeAxx 6150 F: MIFARE
®
- GAT TimeAxx 6150 ISO: ISO 15693
Supported Segments on Data Carriers
The memory on a RFID data carrier is segmented. Different types of segments are possible. For LEGIC data carriers,
the following segments are supported:
- Cash1
- Cash2
- Locker
- UserData
For MIFARE
®
data carriers, the segments for locker and fingerprint data are supported.
For ISO 15693 data carriers, the segments for locker data are supported.
2.1 Intended Use
The GAT Access 6100 B/BA/F/ISO, GAT Access 6100 F PoE, and GAT Access 6100 F BIO terminals are intended
to be used for identifying persons in leisure facilities such as public baths, fitness clubs, and spas by reading their
RFID data carriers and granting access to controlled areas according to the access rights of the persons.
The GAT Access 6100 F Enrollment Station is used to capture fingerprints of persons, which are then stored on the
data carriers of the persons for later verification of the persons. The fingerprints are not stored anywhere else except
the data carriers of the persons.
The GAT TimeAxx 6150 B/F/ISO is intended to control the usage time of showers in leisure facilities such as public
baths or fitness clubs.