Basic Functions
14
Hydromette BL Compact
2.3.2
Material Settings
The
specified
material
ID
is
displayed with the icon for wood
moisture or material moisture.
Material icon and ID
To change the preset for the type, the device must be switched on
and be in the main measurement mode (default after switching on
the device). After pressing the
“Down”
key the view as shown in
Figure 2-3 appears on the device. Press the
“M”
key (measure
keY9
briefly
to change the preset for the material.
The type ID flashes and can be set using the "
Up
" and "
Down
"
keys. Press the "
M
" key again
briefly
to save the change.
The type table can be found in the Annex.
Figure 2-3 Material selection
