Introduction
5
Hydromette BL A plus
0.1
Publication Statement
This publication replaces all previous versions. It may not be
reproduced in any form or processed, duplicated or disseminated
using electronic systems without the written permission of Gann
Mess- u. Regeltechnik GmbH . Subject to technical and
documentary changes. All rights reserved. This document has been
prepared with due care. Gann Mess- u. Regeltechnik GmbH shall
not accept any liability for errors or omissions.
GANN Mess- u. Regeltechnik GmbH, Gerlingen, Germany,
10/04/2019
0.2
General Notes
This measuring device fulfils the requirements of the applicable
European and national directives (2004/108/EC) and standards
(EN61010). Appropriate declarations and documentation are held
by the manufacturer. To ensure trouble-free operation of the
measuring device and operational reliability, the user must carefully
read the operating instructions. The measuring instrument may only
be operated under the specified climatic conditions. These
conditions can be found in chapter 3.1 "Technical Data". This
measuring device may also only be used under the conditions and
for the purposes it has been designed for. Operational reliability
and functionality are no longer ensured if the device is modified or
adapted. Gann Mess- u. Regeltechnik GmbH shall not be liable for
any damage arising from such modifications or adaptations. The
risk is borne solely by the user.
The device must not be stored or operated in air that is corrosive or
contains solvents!
Static charge - At low humidities, aided by external circumstances
(friction during material transport, high insulation value of the
