G&L MMC-A2, Руководство по оборудованию

Страница: 11 / 192

Safety Precautions
G & L Motion Control Inc. MMC Hardware Manual 3
2 Safety Precautions
READ AND UNDERSTAND THIS SECTION IN ITS ENTIRETY
BEFORE UNDERTAKING INSTALLATION OR
ADJUSTMENT OF MMC CONTROL EQUIPMENT
The advice contained in this section will help users to operate and maintain the
equipment in a safe manner at all times.
PLEASE REMEMBER THAT SAFETY IS EVERYONE'S RESPONSIBILITY
2.1 System Safety
The basic rules of safety set forth in this section are intended as a guide for
the safe operation of equipment. This general safety information, along with
explicit service, maintenance and operational materials, make up the
complete instruction set. All personnel who operate, service or are involved
with this equipment in any way should become totally familiar with this
information prior to operating.
2.1.1 User Responsibility
It is the responsibility of the user to ensure that the procedures set
forth here are followed and, should any major deviation or change
in use from the original specifications be required, appropriate
procedures should be established for the continued safe operation
of the system. It is strongly recommended that you contact your
OEM to ensure that the system can be safely converted for its new
use and continue to operate in a safe manner.
2.1.2 Safety Instructions
1. Do not operate your equipment with safety devices bypassed
or doors removed.
2. Only qualified personnel should operate the equipment.
3. Never perform service or maintenance while automatic con-
trol sequences are in operation.
4. To avoid shock or serious injury, only qualified personnel
should perform maintenance on the system.