G&D VisionXS-IP-F-DP-HR, Инструкция по установке и эксплуатации

Страница: 169 / 248

IP-MUX functionality
G&D VisionXS-IP-F-DP-HR · 40
English
Accessing a remote target via select keys
Calling the OSD is not required when accessing the remote targets using select keys.
The remote targets can be accessed faster via select keys.
How to change the select key modifier or the valid keys:
1. Start the local OSD with the Alt+Num hotkey (default)
2. Press F11 to open the Configuration menu.
3. Select the entry Hotkey and press Enter .
4. Use the arrow key to select at least one of the Target Select-Key modifier listed in
the Target Select-Key modifier entry. Afterward, press F8 .
5. Select the
Valid target Select-Keys
entry and press
F8
to select one of the following
options:
6. Press F2 to save your settings.
Ctrl:
Ctrl
key
Alt: Alt key
Alt Gr:
Alt Gr
key
Win: Windows key
Shift:
Shift
key
Num:
only numerical keys
are interpreted as select keys when
pressed in combination with the select key modifier
Alph: only alphabetic keys are interpreted as select keys when
pressed in combination with the select key modifier
AlphNum:
alphabetical and numerical keys
are interpreted as select keys
when pressed in combination with the select key modi-
fier
IMPORTANT: Both the selected valid keys and the select key modifier are no
longer provided as key combinations to the operating system and the applica-
tions on the target computer.