G&D VisionXS-IP-F-DP-HR, Инструкция по установке и эксплуатации

Страница: 167 / 248

Establishing a KVM-over-IP™ connection for the first time
G&D VisionXS-IP-F-DP-HR · 38
English
Restricting KVM-over-IP remote stations (UID locking)
By default,
each
IP matrix and
each
console module is allowed to establish a KVM-
over-IP connection to the computer module..
How to enable/disable UID locking:
1. Use the remote hotkey Ctrl+
Num
to open the OSD.
2. Select the row
System setup
and press
Enter
.
3. Select the row
System security
and press
Enter
.
4. Under
UID Locking
press
F8
to select one of the following options:
None
 All remote stations may establish a KVM-over-IP connection
(
default
).
UID
 Only the remote stations specified in the list may establish a
KVM-over-IP connection.
5. Select the row
Permit all connected devices
and press
Enter
, if UID Locking is activa-
ted and you want to enable a KVM-over-IP connection for all connected devices.
6. Select the row
Manage permitted devices
and press
Enter
, if you want to remove or
add any devices.
F4: Delete
 Mark the device, that you want to remove from the list, press
F4
and confirm you selection.
F3: Add
 Press
F3
.
 Under Device type press F8 to select the device type you want to add.
 Enter the UID of the device under
Device UID
.
7. Press
F2
to save your settings.
ADVICE: Activate the function UID locking if you want to specify which IP matrix
switches or console modules should be able to connect to the computer module.