G&D VisionXS-IP-C-DP-UHR, Сборка, установка и эксплуатация

Страница: 124 / 144

Configuration
49 · G&D VisionXS-IP-C-DP-UHR
Resetting the netfilter rules
In the default settings, all network computers can access the system’s IP address
(open system access).
With the Config Panel web application, you can create netfilter rules to control the
access. After a netfilter rule has been created, the open system access is deactivated
and all incoming data packets are compared to the netfilter rules.
The created netfilter rules can also be deleted with this function.
How to delete the created netfilter rules:
Conf
ig
Pan
el
1. In the menu, click on System .
2. Click on System defaults .
3. Select the scope of the recovery:
Reset all settings
 Reset all settings of the device.
Reset only local network settings
 Reset only local network settings.
Reset only KVM application settings
 Reset all settings except the local network settings.
4. Click on Set system defaults .
OSD
1. Open the remote OSD of the computer module by pressing remote hotkey
(default: Ctrl + Num ) if you want to reset the settings of the extender system.
Open the local OSD of the user module by pressing the local hotkey (default:
Alt + Num ) if you want to reset the local settings of the user module.
2. Select the row Network and press Enter .
3. Select the row Reset netfilter configuration and press Enter .
4. Confirm the security prompt or cancel the process.