G&D VisionXS-IP-C-DP-UHR, Сборка, установка и эксплуатация

Страница: 106 / 144

Configuration
31 · G&D VisionXS-IP-C-DP-UHR
Configuration settings
Changing hotkeys
If many applications that use hotkeys are operated on one computer or if different
KVM devices are used in one cascade, the number of available hotkeys might be
restricted.
In case an application or another device used within the cascade use the same hot-
key, the hotkey can be changed.
How to change the current hotkey:
NOTE: Select your desired key or key combination from the keys Ctrl , Alt , Alt Gr ,
Win or Shift .
OSD
1. Press Ctrl+Num (default) to open the on-screen display.
2. Select the row System setup and press Enter .
3. Select the row Hotkey and press Enter .
4. Under Modifier , select at least one of the listed hotkey modifiers by selecting
the box with the arrow keys. Press F8 to confirm your selection:
Ctrl  Ctrl key ( default )
Alt  Alt key
Alt Gr  Alt Gr key
Win  Windows key
Shift  Shift key
5. Press F2 to save your settings.
Conf
ig
Pan
el
1. In the menu, click on
KVM extender
.
2. Click on the computer module (CPU) you want to configure and then click
on
Configuration
.
3. Click on the tab
General
and then on the tab
CPU
.
4. In the
Hotkey modifier
field of the
Configuration
section, select
at least
one of the
listed modifier keys (
Ctrl
,
Alt
,
Alt Gr
,
Win
or
Shift
) by marking the corre-
sponding check box.
5. Click on
Save
.