G&D VISIONXS-F-DP-UHR Series, Руководство по установке и эксплуатации

Страница: 142 / 164

Configuration
57 · G&D VisionXS-F-DP-UHR
Adjusting the transparency of the on-screen display
In the default settings of the KVM switch, the on-screen display covers parts of the
screen content. However, the parts of the screen contents covered by the OSD are
still visible.
You can adjust the transparency level or turn the transparency off.
How to adjust the transparency of the on-screen display:
OSD
1. Press Ctrl+Num ( default ) to open the on-screen display.
2. Select the row Console setup and press Enter .
3. Select the row Personal Profile and press Enter .
4. Under OSD transparency press F8 to select on of the following options:
high  high transparency of the screen content
average  average transparency of the screen content ( default )
low  low transparency of the screen content
off  on-screen display covers screen content
5. Press F2 to save your settings.
Confi
g
Pan
el
1. In the menu, click on Users .
2. Click on the user account you want to configure and then click
on Configuration .
3. Click on the tab KVM extender systems .
4. In the OSD transparency field, select between the following options:
High  high transparency of the screen content
Average  average transparency of the screen content ( default )
Low  low transparency of the screen content
Off  on-screen display covers screen content
5. Click on Save .