G&D VISIONXS-F-DP-UHR Series, Руководство по установке и эксплуатации

Страница: 134 / 164

Configuration
49 · G&D VisionXS-F-DP-UHR
Reinitialising USB input devices
Once you connect a USB keyboard or mouse to the KVM extender, the input device
is initialised and can be used without restrictions.
The USB connection of some USB input devices needs to be reinitialised after a cer-
tain time. Activate the automatic reinitialisation of the USB input devices if a USB
keyboard or mouse no longer reacts to your inputs during operation.
How to enable/disable reinitialisation of USB input devices:
OSD
1. Press Ctrl+Num ( default ) to open the on-screen display.
2. Select the row Console setup and press Enter .
3. Under USB auto refresh press F8 to select one of the following options:
only faulty  The status of the USB devices is monitored.
If communication to a USB device is interrupted, this
device is reinitialised ( default ).
all  The status of the USB devices is monitored.
If communication to one USB device is interrupted, all
devices are reinitialised.
off  The status of the USB devices is not monitored.
If communication to a USB device is interrupted, the
device is not reinitialised.
4. Press F2 to save your settings.