G&D VISIONXS-F-DP-UHR Series, Руководство по установке и эксплуатации

Страница: 129 / 164

Configuration
G&D VisionXS-F-DP-UHR · 44
English
Freeze mode
If the cable connection between the computer module and the user module is inter-
rupted during operation, the KVM extender no longer displays an image at the remote
console.
Enable the
Freeze
mode if you want the last image that has been displayed at the user
module to be available until the connection is re-established.
To highlight an interrupted connection, the last available image can be displayed
with either a coloured frame and/or a
Frozen
popup and the time passed since the
connection has been interrupted.
How to configure the Freeze mode:
OSD
1. Press Ctrl+Num ( default ) to open the on-screen display.
2. Select the row Console setup and press Enter .
3. Under Freeze mode press F8 to select on of the following options:
off  Freeze mode is disabled ( default )
on  Freeze mode is enabled
4. If the Freeze mode is active, press F8 to select one of the options available
under Freeze visualization :
frame  shows a coloured frame when disconnected
OSD  shows Frozen and the time passed since disconnection
frame+OSD  shows a coloured frame ( frame ) and Frozen ( OSD )
5. Press F2 to save your settings.
Config
Pan
el
1. In the menu, click on
KVM extender
.
2. Click twice on the computer module (
CPU
) you want to configure.
3. Click on the tab
Video channels
.
4. In the
Freeze mode
field, select one of the following options:
Off
 Show no image if the connection is lost (
default
).
On | OSD timer + frame
 Display of a coloured frame in case of a
disconnection as well as display of the warning
Frozen
and the time elapsed since the
disconnection.
On | Frame
 A disconnection is indicated by a coloured frame.
On | OSD timer
 Display of the warning
Frozen
and the time
elapsed since the disconnection.
5. Click on
Save
.