G&D VisionXS-F-DP-HR, Инструкция по установке и эксплуатации

Страница: 198 / 224

Configuration
82 · G&D VisionXS-F-DP-HR
Resetting the netfilter rules
In the default settings, all network computers can access the system’s IP address
(open system access).
With the Config Panel web application, you can create netfilter rules to control the
access. After a netfilter rule has been created, the open system access is deactivated
and all incoming data packets are compared to the netfilter rules.
The created netfilter rules can also be deleted with this function.
How to delete the created netfilter rules:
OSD
1. Open the remote OSD of the computer module by pressing remote hotkey
( default : Ctrl + Num ) if you want to reset the settings of the extender system.
Open the local OSD of the console module by pressing the local hotkey
( default : Alt + Num ) if you want to reset the local settings of the console module.
2. Select the row Network and press Enter .
3. Select the row Reset netfilter configuration and press Enter .
4. Confirm the security prompt or cancel the process.