G&D VisionXS-F-DP-HR, Инструкция по установке и эксплуатации

Страница: 135 / 224

Start-up
G&D VisionXS-F-DP-HR · 19
English
Operating the KVM extender exclusively
Activate the right for permanent access to operate the KVM extender exclusively
with one console.
If this function is activated, the extender’s exclusive operation can be activated by
pressing the hotkey Print (default: Ctrl + Print ).
Immediately after pressing this hotkey, the input devices of the concurrent console
are deactivated. By pressing the hotkey again at the active console, users at both
consoles are again able to operate the KVM extender.
Related topics:
 Right for exclusive access to the console on page 65
 Changing the video mode of consoles on page 66
 Changing the exclusive mode aktionkey on page 63
IMPORTANT: The activation of the
Transm. Redundancy
feature, an additional
SFP
transceiver
and the connection to a second console module are prerequisites for this
operation option.
NOTE: After the exclusive operation of the KVM extender has been activated at
one console, the
Caps Lock
,
Num
as well as the
Scroll Lock
LEDs are blinking alter-
nately at the keyboard of the locked console.
The blinking
Scroll Lock
LED at the active console indicates the exclusive opera-
tion of the KVM extender.
ADVICE: In the standard configuration of the KVM extender, the computer’s
video signal is output at the active as well as the concurrent console monitor.
If necessary, change the video modes of the console modules (see page 66) to
switch off the image of the concurrent console while you operate the extender at
the other console.