G&D VisionXS-C-TypeC-UHR, Руководство пользователя

Страница: 124 / 200

Initial configuration of the network settings
20 · G&D VisionXS-C-TypeC-UHR
Checking the availability of a host in the network (Ping)
The OSD can be used to test the availability of a particular host (e. g., a computer or
a network device) in the network.
How to check the availability of a host in the network:
1. Use the local hotkey ( default : Alt + Num ) to open the local OSD of the console module or
use the remote hotkey ( default : Ctrl + Num ) to open the remote OSD of the computer
module .
2. Select the entry Network (local OSD) or Network setup (remote OSD) and press
Enter .
3. Select the entry Ping host and press Enter .
4. Use the Host entry to enter the IP address or the host name and press Enter .
5. The test results are displayed in the following table:
6. Press Esc to leave the menu.
Transmitted: number of transmitted data packets
Received:
number of received data packets
Lost: number of lost data packets
Min. RTT:
minimum round-trip-time
Avg. RTT: average round-trip-time
Max. RTT:
maximum round-trip-time
NOTE: A message informs the user if the host name cannot be resolved into an
IP address.