G&D OperatorPanel, Инструкция по установке и эксплуатации, Страница: 30 / 40

Setup menu
9 · G&D OperatorPanel
Resetting the defaults
Use this function to reset the defaults of the delay functions (see previous page).
How to reset the defaults:
1. Start the terminal emulator.
2. Load the connection settings of the setup menu and establish the connection.
3. Use the
Arrow 
or
Arrow 
keys to select
Set System Defaults
.
4. Press
Enter
to reset the defaults.
Showing the firmware version
How to show the firmware version in the terminal emulator:
1. Start the terminal emulator.
2. Load the connection settings of the setup menu and establish the connection.
3. Use the
Arrow 
or
Arrow 
keys to select
Show System Info
and press
Enter
.
The installed firmware version is displayed.
4. Press
Q
to return to the main menu.