Configuration
G&D miniMUX4 ·
43
Support of special PS/2 keyboards
The KVM switch supports the following special keyboards:
PixelPower Clarity (blue)
SKIDATA1
If you apply such a keyboard at the console, you can enable the support of one of
these keyboards in the KVM switch.
How to enable/disable the support of special keyboards:
1. Press
Ctrl+Num
(standard) to open the On-Screen Display.
2. Press
F1
to open the
Function
menu.
3. Use the
Arrow keys
to select
System Config
and press
Enter
.
4. Use the
Arrow keys
to select
PS/2 Keyboard Type
and press
Enter
.
5. Select the keyboard layout you want to disable/enable, and press
Space
.
6. Leave the menu by pressing
Enter
.
7. Press
F1
to save your settings.
Resetting the defaults
This function resets the defaults of the KVM switch. After you perform the function,
all defaults apply again.
How to reset the default configuration:
1. Press
Ctrl+Num
(standard) to open the On-Screen Display.
2. Press
F1
to open the
Function
menu.
3. Use the
Arrow keys
to select
System Config
and press
Enter
.
4. Use the
Arrow keys
to select
Set System Defaults
and press
Enter
.
5. Press
Esc
to cancel the function or
Space
to reset the defaults.
IMPORTANT:
A yellow
X
highlights the active special keyboard. If no special
keyboard is highlighted, the keyboard is treated as standard keyboard.
