Configuration
G&D miniMUX2 ·
16
Resetting the defaults
This function resets the default settings of the KVM switch.
How to reset the default settings:
IMPORTANT:
Performing this function reactivates the default settings of the KVM
switch as shown on page 11.
Setup M
o
de
1. Press
Backspace
(default:
Ctrl+Backspace
) to enable the setup mode.
If the hotkey delay is active, press the key combination for
seven seconds
.
2. Press the setup key listed below to reset the default settings:
D
resets default settings
Se
tu
p
M
en
u
1. Use the terminal emulator to establish a connection to the KVM switch
and connect the serial data cable to the
Service
socket.
2. Use the
Arrow
or
Arrow
keys to select the
Set System Defaults
entry.
3. Press
Enter
to reset the default settings.
4. Confirm the pop up security query with
Enter
.
Pressing the
Q
key cancels the function.
Содержание miniMUX2
Страница 70: ...NOTES ...
Страница 71: ...NOTES ...
