G&D DVIMUX8-OSD-USB, Инструкция по установке и эксплуатации

Страница: 84 / 140

Status displays
10 · G&D DVIMUX8-OSD-USB
Status displays
The LEDs on the front panel of the KVM switch highlight the device‘s current oper-
ational status:
Section LED Status Meaning
CPU 1 … 8 Active on All inputs are forwarded to the computer of this channel.
In the default settings of the KVM switch, data of devices
connected to the »USB 2.0 Devices« interface are for-
warded to the computer of this channel, too.
An additionally flashing Active LED (see below) of
another channel shows that USB data is permanently
switched to another channel.
flashing The devices connected to the »USB 2.0 Devices« interface
are permanently switched to this channel (Pinning).
off The channel is currently inactive.
Status on The computer is ready for operation.
off No computer is connected or the computer is turned off.
User Active on The keyboard is initialised successfully.
blinking The console keyboard cannot be found.
Status on The KVM switch is supplied with the necessary voltage.
off The KVM switch is turned off or is not supplied with the
necessary voltage.
If necessary, check the proper connection of the power
supply cable.