G&D DVIMUX4-DL-USB, Дополнительные инструкции по установке и эксплуатации

Страница: 80 / 92

Configuration
32 · G&D DVIMUX4-DL-USB
Changing the bitrate of the RS232 port
The RS232 port transfers a certain amount of data per time unit. The bitrate is given
in bit/s .
If the bitrate cannot be adjusted to the standard bitrate of the KVM switch (115.200
bit/s) in the terminal emulator or the serial device, the bitrate of the
RS232
port can
be modified.
How to select the bitrate of the RS232 port of the KVM switch:
Mode of the RS232 port
IMPORTANT: Transmitter and receiver of the data must use the same bitrate to
ensure successful communication between the terminal emulator or a serial device
and the KVM switch.
Setup
Menu
1. Use the terminal emulator to establish a connection to the KVM switch.
2. Use the
Arrow 
or
Arrow 
keys to select
RS232 Port Config
and press
Enter
.
3. Use the
Arrow 
or
Arrow 
keys to select the row
Bitrate
.
4. Press the
Space
key (repeatedly) to select between the following bitrates:

9600

19200

38400

57600

115200
(default)

230400
5. After having selected your desired settings, press
Q
to leave the dialog.
6. Press the
S
key to save your settings.
IMPORTANT: For the variant
DVIMUX4-DL-USB
, the
Switch
mode is set as default
mode for the service socket. It is not possible to change this mode.