G&D DVIMUX4-DL-PS/2, Инструкция по установке и эксплуатации

Страница: 20 / 40

Configuration
17 · G&D DVIMUX4-DL-PS/2
Changing the single hotkey
Press the hotkey and the
Backspace
key simultaneously to start the setup mode of the
KVM switch. Pressing the hotkey and the select key simultaneously enables the
switching of channels.
If an application program or another G&D device uses the same hotkey within the
cascade, the hotkey can be changed.
How to change the current hotkey:
NOTE: The single hotkey Ctrl is preset at default.
Setup M
o
de
1. Press the Backspace (default: Ctrl+Backspace ) key combination to
enable the setup mode.
If the hotkey delay is active, press the key combination for seven seconds .
2. Press one of the setup keys listed below to enable a certain hotkey:
Ctrl  enables Ctrl hotkey
Alt  enables Alt hotkey
Alt Gr  enables Alt Gr hotkey
Win  enables Win hotkey
Shift  enables Shift hotkey
Setup Men
u
1. Use the terminal emulator to establish a connection to the KVM switch.
If the setup menu is not displayed, the
Switch
mode of the service port is
enabled. Enter »
#!
« to change to the setup menu.
2. Use the
Arrow 
or
Arrow 
keys to select the
Hotkey
entry.
3. Press the
Space
key (repeatedly) to enable a certain hotkey:
Ctrl
 enables
Ctrl
hotkey
Alt
 enables
Alt
hotkey
Alt Gr
 enables
Alt Gr
hotkey
Win
 enables
Win
hotkey
Shift
 enables
Shift
hotkey
4. Press the
S
key to save your settings.