G&D DVI-Vision-IP-Fiber, Инструкция по установке и эксплуатации

Страница: 164 / 240

Initial configuration of the network settings
G&D DVI-Vision-IP-Fiber · 39
English
Reading out the status of the network interfaces
The current status of both network interfaces can be read out in the OSD.
How to detect the status of the network interfaces:
1. Open the remote OSD of the computer module by pressing the remote hotkey
( default : Ctrl+Num ), if you want to change the configuration of the computer mod-
ule.
Open the local OSD of the console module by pressing the local hotkey ( default :
Alt+Num ), if you want to change the configuration of the console module.
2. Select the row Network setup and press Enter (remote OSD) or F11 , select the row Net-
work and press Enter (local OSD).
3. Select the row Link status and press Enter .
4. The paragraphs Transmission and Management include the following values:
5. Click on
ESC
to leave the menu.
Link detected: Connection to the network established (
yes
) or dis-
connected (
no
).